The Aimpoint® Acro P-2 is the next generation in the Acro series with an optimized technology.

 

With the new battery size of CR2032 and new diode technology the Acro P-2 will last for 5 years of continuous use on setting 6/10 (daylight setting) . The new design of the Acro P-2 makes the system submersible to 35 meters (115 feet). The new LED gives you a brighter 3.5 MOA dot.

 

The Acro P-2 can be mounted on a wide range of weapon platforms in combination with different mounting solutions developed especially for this small red dot optic. It can be used as a backup sight for magnifying scopes, personal defense weapons, and any area where a small red dot system is applicable. It is trusted by law enforcement, military, hunters, and sport shooters alike. They all rely on the Acro advantage.

 

The rugged and reliable Acro P-2 is the smallest professional grade, enclosed red dot sight for pistols and other platforms.

 

The Acro P-2 FDE has a Cerakote H-Series surface coating with dark earth brown housing .

 

 

  • Special edition with flat dark earth (FDE) colored Cerakote® H-Series surface coating

  • 50,000 hours (over 5 years) of operation on one battery
  • Submersible to 35 meters (115 feet)
  • Weight 61 g (2.2 oz) sight only
  • Optimized for pistol and applications which require a low-profile red dot system
  • Height of Optical Axis 14 mm (0.6 in) measured from top surface of mechanical interface
  • 4 night vision compatible settings and 6 daylight settings
  • 3.5 MOA dot size

 

 

General specifications

Size L x W x H: 47 x 33 x 31 mm / 1.9 x 1.3 x 1.2 in
Dot size: 3.5 MOA
NVD compatible: Yes
Eye relief: Unlimited
Mounting platform: Acro Interface
Weight: 61 g / 2.2 oz
Magnification: 1X - No Magnification
Transmission: Average 70% in the range 420 - 900 nm
Mounting solution: Integrated Acro™ Interface
 
Optical Information
Dot size: 3.5 MOA
Magnification: 1X - No Magnification
Transmission: Average 70% in the range 420 - 900 nm
Dot color: Red
Optical coating: Anti-reflex coating all surfaces and multilayer coating objective lens
Parallax: Operationally parallax free - No centering required
* MOA (minute of angle): 1 MOA ≈ 30 mm at 100 meters ≈ 1 in at 100 yards
NVD compatible: Yes
Eye relief: Unlimited
Light source wavelength: 650 nm red light
Clear aperture: 15 × 15 mm / 0.59 × 0.59 in
Diode: LED (Light Emitting Diode) totally eye safe
 
Power Source Information
Battery life: 50,000 h at daylight setting 6 (15,000 Lux, room temperature)
Power switch: Push Buttons
Battery type: CR2032, 3V, Lithium
Daylight settings (DL): 6
 
Physical Information
Material housing and tube: High Strength Aluminum
Color housing: Flat Dark Earth
Adjustment 1 click =: 1 click = 20 mm at 100 m / 0.7 in at 100 yds
Size L x W x H: 47 x 33 x 31 mm / 1.9 x 1.3 x 1.2 in
Weight: 61 g / 2.2 oz
Surface finish housing: Cerakote® H-Series surface coating
Lens covers: Not Included
Size L x W x H - Sight only: 47 x 33 x 31 mm / 1.9 x 1.3 x 1.2 in
Weight - Optic only: 61 g / 2.2 oz
 
Environmental Information
Water resistant: 35 m / 115 ft
Storage temperature: - 51°C to + 71°C / - 60°F to + 160°F
Humidity: Operable during and after Humidity. Limits: RH: 95%, Temp: +20°C to +50°C (+68°F to +122°F), cyclic
Operating temperature: - 45°C to + 71°C / - 49°F to + 160°F
Temperature shock: Operable after a temperature shock between - 45°C and + 71°C (- 49°F and + 160°F)
Vibration: Withstands Vibration. Limits: Vibration, sinusoidal in a frequency range of 10-150 Hz. Frequency: 10-30 Hz, ±1.587 mm, Frequency: 30-150 Hz. 5.75 g, 1 octave/min. Direction: X, Y and Z, Time: 30 min/direction.